Powerful Torque Ideal for a Variety of Applications

High Starting Torque

With the sensorless vector control and auto-tuning functions, this Unit ensures high starting torque of 200% at 0.5 Hz.

Note. The frame may have to be raised depending on the condition.

Overload Limit/Overcurrent Suppression Function

1.    The Inverter monitors the motor current during acceleration or constant speed operation in order to lower output frequency automatically.
 

2.    This function suppresses significant change in current caused by rapid acceleration, etc.
Acceleration will be suppressed temporarily if the output current reaches approx. 180% of the rated current during acceleration.

Various Applications

Safety Function

Conforming to stop category 0 under IEC60204-1 and the ISO13849-1: 2006 (PLd) standard (certification pending).

Simple Position Control Function

1.    Comes standard with the pulse input functions.
 

2.    Supporting simple positioning to a maximum of 8 points by setting the position command, speed reference and acceleration/deceleration time to parameters.

Comes Standard with RS-485 (Modbus-RTU)

1.    Comes standard with the Modbus-RTU communication function to communicate with, and also read/write various parameters from/to, the host equipment.
Broadcasting from the host equipment is also supported.

2.    Transfer Speed: Supporting speeds up to 115.2 kbps

3.    Co-inverter communication is also supported.

Side-by-Side (Zero Clearance) Installation

Since the Inverter can be installed with its right or left face contacting a wall or other structure, the installation space can be reduced.

Note. The carrier frequency, etc. must be de-rated depending on the model.

Password Function

Comes with the password function to prevent reading or changing of parameters without proper access privileges.